onurbNovember 29, 2017 at 7:21 am #322881
Would you mind sharing the .config file used to generate the 2.264 firmware?
Thanks in advance.alzhaoNovember 29, 2017 at 3:39 pm #323121
Please check the imagebuilders. Even you have the .config you will not be able to generate the same firmware as our stock firmware.
But you can compile a clean firmware with only the packages you need.onurbNovember 29, 2017 at 11:13 pm #323571
I forgot to mention the device: MT300N V2.
WiFi is not woking. I’ve used both mt76* packages and mt7628-binary.alzhaoNovember 30, 2017 at 4:06 pm #324321
You cannot use mt76 and mt7628 at the same time. They are both the wifi drivers. This will cause problems.onurbDecember 1, 2017 at 1:56 am #324831
I was able to get WiFi working with the OpenSource drivers with the following config (/etc/config/wireless):
config wifi-device ‘radio0’
option type ‘mac80211′
option channel ’11’
option hwmode ’11g’
option path ‘platform/10300000.wmac’
option htmode ‘HT20’
config wifi-iface ‘default_radio0’
option device ‘radio0’
option network ‘lan’
option mode ‘ap’
option ssid ‘MyNetwork’
option key ‘MyPass’
option encryption ‘psk-mixed’
However, Uploads speeds are null (~10 kbps, tops). I can’t upload a file. On cable, it works fine.
Any help is appreciate.
I’ve tried removing the opensource driver and using the MTK7628-binary package. However this same configuration didn’t work.alzhaoDecember 1, 2017 at 12:44 pm #325391
Can you pls try this:
Imagebuilder tells you how to compile firmware for MT300N-V2 exactly.
Here is the files that should be used for MT300N-V2 MTK driver, specially /etc/config/wirelessalzhaoDecember 22, 2017 at 4:11 pm #352361
It depends on what applications you want to develop. I think @bluewavenet means that the MTK driver is not open source. If you use our imagebuilder it is OK because it is already compiled. MT7628 open source driver doesn’t not works good. So, please use MTK driver directly. It works as repeater and ap, but not monitor.
You must be logged in to create new replies.